For installations in seaside areas and outdoor applications where the air is highly humid and corrosive, Stainless

Steel Valves are recommended which provide elevated surface protection against corrosion. These valves

are also recommended in applications where regular surface treatment is carried out to prevent fungal and

bacterial growth.

The Manik MHPSV-SS Valves have been specially design for such applications.

The MHPSV-SS Stop Valves are refrigerant shut-off valves designed to be socket-welded or butt-welded directly

to steel piping, thereby eliminating potential leaky flanges or threaded joints and simplifying installation. These

valves fit all requirements of the latest refrigeration technology and have desired flow characteristics with a low

pressure drop design. The MHPSV-SS has specialised internal back- seating support which allows the shaft

seal (packing gland) to be replaced while the valve is still under working condition. Interchangeable handwheel

or seal cap available. These valves are available in angle and globe types. The Teflon seat lends durability to

the seating surface.

 

MGLG are Manik Glass level gauges made from special low temperature steel plates that are designed to

meet the requirements of modern industrial refrigeration. They are supplied with stop valves for connection and

isolation to the refrigeration system. The MGLG provides an accurate easy reading of the refrigerant level inside

the pressure vessel over which they are mounted. The top and the base frame are mounted together with the

help of SS Allen bolts. This makes it easy for insulation, inspection and service onsite, if required.

All gauges are supplied with a built-in safety system (non-return device) and in case a glass gets damaged,

the safety system due to the pressure of the refrigerant, shall prevent refrigerant loss to an absolute minimum.

Manik Engineers LIQUID EYE gives simple indication of actual liquid levels in industrial and commercialrefrigeration systems. When liquid refrigerant is present the distinctive reflex glass appears dark; when vaporrefrigerant is present, the glass is light. The long neck housing provides enough length for ease of welding andinsulation clearance for low temperature applications. The optional frost-free shield facilitates clear viewing ofrefrigerant level under frosting conditions.The Liquid Eye is available in 2 types :1. MLE - Which can be directly welded upon pressure vessels or liquid columns2. DMLE - Which has dual glass for viewing the internal media and is mounted inline.

With repeatability and a wide range of flow settings, this Flow Switch Type FS-100 E provides precise flow sensing. Its robust design provides long-life dependability in both water and oil. It is perfect for finding incorrect flow rates in systems that handle a lot of volume for lubrication, cooling, or process. The Flow Switch Type FS-100 E improves exterior versatility while retaining the same level of precision and durability as switches with fixed settings. Your selection of flow settings is wide with this adaptable switche within a certain range.

Specification

• Maximum working pressure: 798 psi g (55 bar g)
• Fluid temperature range: -60C to + 150C (76F to 302F)
• Application: Ammonia, Fluorocarbons, Carbon Dioxide
• Material: Body: LCC A352 Cast Steel Body
• Internals: SS304
• Seat: PTFE
• Connections: DN15-40 -Socket/Butt Weld
• DN50-300 -Butt Weld.
• Reliable Back Seating.
• DN 15-65 Available in stainless steel upon special request